Friday, August 28, 2020

Car Washers: Uses and Guide of washing


During the time spent cleaning vehicles, individuals will in general spotlight on the body and windows of the vehicle, since these are the nearest to eye level. Habitually, certain pieces of the vehicle get disregarded in the washing cycle. What's more, one of those frequently ignored zones is the vehicle's wheels.

Maybe individuals think since they're so near the ground, nobody's going to take a gander at them, and there's no point pestering in cleaning them since they'll get filthy again unexpectedly early. However, have you at any point seen a vehicle new off the part, with new wheels? Clean aluminum wheels have a significant effect, and cleaning them could even cause you to feel like you have another vehicle once more. It is anything but a horribly troublesome errand, either, as this article will depict—only a direct, bit by bit measure that essentially anybody can do.

In light of this, would you say you are hoping to take your vehicle's aluminum wheels from unsanitary and blah back to glimmering flawlessness? Continue perusing to get familiar with how to do as such.

Guide of washing car wheels

·         Rinse the wheels

·         Apply Wheel Cleaner

·         Add grease

·         Rinse again and dry them off

·         Clay  and polish the wheels

·         Seal with wax

It’s generally advisable that one should wash their car wheels with soap, water and a car washer every time you wash your car (perhaps twice a month). More thorough cleanings, plus adding a layer of protective substances, can happen with less frequency—something like 4-6 times per year.

Guide to remove mold from your car

Mold is a type of fungus that generally forms in the presence of higher temperatures and high levels of moisture. The individuals who are generally helpless with the impacts of molds incorporate those with lung sicknesses, sensitivity victims, and those with bargained insusceptible frameworks. The nearness of mold can prompt respiratory and skin disturbance, lung diseases, asthma, and other wellbeing challenges.

Here we are discussing several ways of eradicating molds from your car as:

1.       Protect your sensitive area of skin as hands and eyes

2.       Show up your car under bright sun to vaporize moisture

3.       Inspect your car thoroughly for molds as they are in different colors. Inspect them in car areas as beneath surface of seats, steering wheel, seat belts..

4.       Spray with disinfectant solutions

5.       Wash car seats cover and carpets

6.       Use car freshener spray to avoid odour of molds or moisture locked


So hope these basic tips will help you in car washing process especially for new car owners. Contact us for best range of car washers and domestic washer equipments.

Monday, July 27, 2020

Agricultural sprayers manage Proper Crop production

With crop creation continually presented to dynamic and capricious difficulties, pest control assurance and yield sustenance speak to extremely fragile parts of agriculture world. In this manner, farmers are regularly constrained to locate a reasonable and financially savvy method of overseeing both of these basic angles.

Fortunately, the advancement of farming innovation has brought about a wide scope of agricultural sprayers that can be utilized for both foliage treatment (use of supplements directly onto the plant's leaves) and pest removal.

Agricultural sprayers are a unique sort of homestead gear made and utilized for use of fluid manures and pesticides during the yield development cycle. These noteworthy cultivating instruments are accessible in different sizes and types, from hand-held and manual sprayers to huge followed or mounted sprayers followed by cutting edge atomizers. Versatile, huge scope ranchers and homestead collaborations practice airborne splashing.

At the end of the day, every rancher has the chance to locate an appropriate showering arrangement that will fit the particular needs of his homestead.

The Diversity of Agricultural Sprayers

Of the various sorts of agrarian sprayers, there are three normal orders, which include:

Manual sprayers

Battery operated sprayers

Aerial sprayers

Each of the previously mentioned sprayer types has a few favorable circumstances and inconveniences. For instance, the manual sprayer is a basic bit of cultivating gear, moderate and accessible for each rancher. Notwithstanding, these are progressively suitable for littler surfaces. Something else, the application would be work concentrated and excessively moderate.

Then again, automated sprayers, followed or mounted on a farm truck, are progressively beneficial and less work concentrated. In any case, there is some little holder farmars that are frequently constrained in their assets. Consequently, they find power sprayers too high venture.


Furthermore, huge scope ranchers and cultivating collaborations lean toward ethereal sprayers. These sprayers effectively oversee splashing of enormous ranch surfaces with insignificant exertion. Tragically, however, airborne sprayers are once in a while a reasonable arrangement.

The Choice of Sprayer is Actually Very Simple

So as to oversee bother security and harvest nourishment, a rancher ought to pick the most proper kind of sprayer relying upon the particular needs of the homestead. Also, funds consistently play a factor in the decision of reasonable showering gear.

In any case, it's imperative to remember that sprayers are simply bits of cultivating gear that lead to achieving the alluring outcome. So as to improve the basic phase of harvest creation, a rancher must apply an entire arrangement of good homestead the executives rehearses. These include: crop revolution, planting of safe cultivars, treating as indicated by the consequences of the dirt investigation, and rehearsing normal field and harvest checking.

Along these lines, paying little heed to the kind of sprayer you choose to utilize, ensure that it fits the requirements of your farmer. What's more, remember the other significant parts of your farm the board too.

For other farming equipments you can contact trusted portal of where you will find wide range of mini tiller and brush cutter for proper cultivation of crop yield. These farming techniques enhances the crop production.

Wednesday, July 8, 2020

Power Sprayer: Definition, uses and Maintenance

Plant Protection equipments
The choice of agricultural equipment depends on its specific use and the need of a particular pest control measure.

·         The correct usage of equipment and its proper maintenance are important factors which affect the ability to place pesticides on target more economically and effectively.
·  Selecting the right agricultural sprayer for pesticide application is important for successful pest control.

The complete knowledge of pest problem is important to define the target i.e., location of the pest (on foliage, under the leaves, at root zone etc).

¨ The application techniques ideally should be target oriented so that safety to the non-targets and the environment is ensured. Therefore, proper selection of application equipment, knowledge of pest behavior and skillful dispersal methods are vital.
¨To cover the target with maximum efficiency and minimum efforts to keep the pest under control as well as minimum contamination of non-targets.

Ø  Convenient to operate
Ø  Easy to clean
Ø  Non-absorbent
Ø  Corrosion resistant  
Ø  Resistant to damage
Ø  Convenient to fill
Ø  Durable
Ø  The pesticide label
Ø  Perform proper maintenance
Ø  Use proper operation procedures
Ø  Set it up correctly
Ø  Select the right equipment
To Enhance Safety and Benefits and to Get the Most From Any Sprayer:
Ø  Ultra low volume or controlled-droplet applicators (ULV/CDA)
Ø  knapsack power sprayers
Ø  Tractor-mounted sprayer
Ø  Hand compressed sprayers
Ø  Hand sprayers and atomizers

Types of Plant Protection Equipment
Ø   Types of Spray Equipment Hand sprayer Knapsack (LOK) Battery powered
Ø  Low pressure hydraulic High pressure ULV Chemigation or injection
Ø   Granular¤Liquid (sprayers) ¤ Two basic types of application systems

Ø  Speed required to treat an area (this will depend on type of crop, stage of crop growth, and volume of spray solution to be applied).

Ø   Operating cost, and

Ø  Availability of after sales service,

Ø  Cost of equipment,

Ø  Durability of equipment,

Ø  Area requiring treatment

Ø  Availability of labor (human or animal power),

Ø   Availability of diluent (water, oil, kerosene, etc.),

Ø  Frequency of pesticide application,

Selection and use of Spraying Equipment Spraying equipment should be selected on the basis of:
Ø  Never unclog a nozzle by blowing through it.
Ø   Clean nozzles with a soft tool, not metal.
Ø  Check for nozzle clogging or pattern changes.
Ø  During Spray Applications
Ø  Do not use herbicide- designated equipment for other applications
Ø  Re-use rinse water
Ø  Check operation and repair
Ø  Switching pesticides ¤Making repairs ¤ Clean equipment before
Ø  Wipe off residues.
Ø  Flush hoses, tanks, nozzles.

After Spraying
Ø  Installing and Maintaining Equipment Once equipment has been installed: • It must be maintained regularly • Only qualified people should maintain it • Set up a maintenance schedule with your supplier or manufacturer

Care and upkeep of hand sprayer
¨ General maintenance ¨Care and Maintenance of Plant protection Equipment  &  Care and upkeep of pp equipment in transportation¨ Care and upkeep of pp equipment when taken to field ¨ Care and upkeep of pp equipment when not in use ¨ Care and upkeep of power sprayers and dusters ¨duster

The cleaning and washing of the chemical tank, discharge lines, nozzles, etc., are to be done regularly after the day's spraying work is completed otherwise the residues of chemicals used for spraying acts on the parts and causes corrosion and deterioration of materials.
Special care has to be taken for maintaining the plant protection equipment. The pesticide formulations are chemically aggressive on metals, etc.

For best quality purchase of power sprayers and brush cutters reach at

Thursday, May 28, 2020

Brush cutter: From Right selection to maintenance

Whether you are a house gardener or a professional who loves gardening and landscaping, getting the right tools for your needs is quite challenging. Brush cutters are perfect tools for lawn cutting and trimming of shrubs and weeds. These are widely used for trimming dense bushes grown in vegetable farm section. In technology oriented world buyer have many options available to them from store to online shopping where they can purchase and exchange back the agricultural tools if there is some issue with compatibility. In this blog we had tried to discuss some tips about how to get the right brush cutter for your agricultural needs.
To start with Brush cutters come in three variants:
1)      Handheld Brush Cutter- More powerful engine than string cutter and used for thick grass, weeds, dense bushes.
2)      Walk-behind Brush Cutter- These cutters are perfect for areas of overgrown vegetation. It can be helpful for trimming and cutting in area that requires less maintenance.

3)      Tow-behind brush Cutter- Used in big field of cultivation and can be used with attaching to garden tractor. Used for cutting thicker bushes and weeds.
Main accessory of brush cutter is brush cutting blades which come in different variety as per requirement and capacity.
·                     Brush cutter with 8 or lesser blades- used for small grass patches or weeds
·                     Brush cutter with 9-40  teeth or blades- Used for thick weeds and shrubs
·                     Brush Cutter with more than 40 teeth- Used for small trees and saplings
·                     Brush cutter with knives or tri blades- used for dense shrubs and reeds

We at Chandak Agro equipments have variety of Agricultural Sprayers and equipments. Contact us for buy various types of Brush cutter and accessories.

Maintenance of Brush cutter

Proper maintenance at right time interval and process is essential for maintaining any equipment. Some specific tips for maintenance are:
v  Use the right fuel for your cutter
v  Check the mowing head and line feed. Don’t use damaged parts or blades of cutter.
v  Clean your brush Cutter regularly. It should be properly mounted to the deflector.